How to confirm the size of the shower room

The measurement of shower room size is very important. If there are omissions or errors in this link, the subsequent ordering, production, installation and other work will be greatly affected or even cannot be completed, so everyone must pay special attention to it. Today, I will share with you the method of measuring shower room size and the tips in it!

1. Shower room size: measurement of conventional shower screen

If the locking wall part is a screen made of adjustable aluminum, the order size after measurement can be 5mm smaller than the actual size. If the locking wall part is a screen made of glass clips, the order size after measurement can be 3mm smaller than the actual size, but the size must not be enlarged. In addition, some building walls may be slightly tilted, so when measuring, the width of the upper, middle and lower positions should be measured, and the smallest size should be taken as the customized product size. Special reminder: If the screen is equipped with a screen stem, the top size must be measured, otherwise there may be problems with installation.

2. Shower room size: measurement of conventional room body

The measurement of all room bodies is uniformly stipulated as the outer size of the stone base (taking the standard room body as an example, the measured size is the outer edge size of the bottom basin).

3. Shower room size: measurement of abnormal conditions

Some terrains may require reinforced doors or lengthened pull rods. In this case, the size of the abnormal part should be measured and marked on the order; in addition, pay attention to abnormal conditions in the bathroom to determine the correct door opening direction, internal and external opening methods, and movable door size.  contact us today at www.dabbl.de