News And Events
What is the main thing to see when buying a shower room?

What is the main thing to see when buying a shower room?

4 Dec 2023
What is the main thing to see when buying a shower room?

First, look at the glass:


1) See whether the glass is transparent, there are no defects such as stray points and bubbles.


Analysis: The impurity of the glass material or the defect of the process will cause the glass to have defects such as joints and bubbles, and reduce the mechanical strength of the glass.


2) See whether there is 3c certification on the original glass, whether there is a brand name, and whether there is a security code.


Analysis :3c certification and certification code is the abbreviation of China's mandatory product certification, shower room products can not be sold without this logo.


3) Look at the completely tempered glass fragment template.


Analysis: According to national standards, the number of fragments in the 50*50mm area of tempered glass should not be less than 40 particles.



Second, look at aluminum:


1) Look at the hardness of aluminum.


Shower room aluminum often needs to support the weight of dozens of kilograms of glass, if the hardness and thickness are not enough, the service life of the shower room will be short. The thickness of qualified shower room aluminum is more than 1.2mm, and the glass aluminum on the rail needs to be more than 1.5mm. The hardness of aluminum can be tested by hand pressing aluminum frame, and aluminum with hardness above 13 degrees is difficult for adults to deform by hand pressing.

2) See whether the surface of the aluminum is smooth, there is no color difference and trachoma, and the profile finish.


Analysis: In the treatment of second-hand aluminum, the surface smoothness is not enough, there will be obvious color difference and sand holes, and the finish of the section is dark.

Three, look at the pulley


1) Look at the material of the pulley and the sealing of the wheel seat.


Analysis: The wheel seat of the pulley should use compression and weight resistant materials, such as 304 stainless steel and high-end synthetic materials. The sealing of the bearing is good, water vapor is not easy to enter the wheel, and the smoothness of the wheel is guaranteed.

2) Look at the compatibility of the pulley and the aluminum track.


Analysis: The pulley and the track should be closely matched, the gap is small, and it is not easy to fall off when it is hit by external force to avoid safety accidents.

Fourlook at the hinge, handle, support bar etc.

Stay Up to Date